Compatibility
Generally, STOP IT® may be used with products that are compatible with
polyurethane plastic. The end user must always determine the suitability
of the product for its intended use and recognize that the durability
of the repair may be affected by strong acids or bases.
Chemical Resistance
No visible changes in STOP IT® after an immersion term of 35 days
in the following chemicals:
Acetic Anhydride
Ammonia
Ammonium Hydroxide (10%)
Decyl Ammonium Chloride
Diesel Fuel
Diethyl Ether
Ethyl Acetate
Ethyl Ether
Ethylene Glycol
Gasoline
|
Hydrochloric Acid (10%)
Lube Oil
4-Methyl 2-Pentanone
Mineral Spirits
Sodium Hydroxide (50%)
Sulfuric Acid (10%)
Sulfuric Acid (25%)
Varsol
Xylenes, Mixed o-, m- and p-
|
For more detailed chemical resistance information, see FIX STIXTM
Chemical Compatibility Guide.
Potable Water
STOP IT® is accepted for use on potable water lines by the WRC (UK). The FIX STIXTM EPOXY included with each kit is NSF certified. |
 |
Safety Features
Even under extreme pressures, the STOP IT® Pipe Repair Tape will not shatter or crack.
STOP IT® releases pressures slowly.
When tested to the failing point in laboratory conditions failure was indicated by
a reduction in line pressure and seepage.
Physical Properties
Shelf Life: Two years from date of purchase when stored at 40°to 83°F (5° to 28°C)
Color: White or black
Tensile Strength (ASTM D 638-111): 3,920 psi (275 kg/cm2)
Bond Strength (ASTM D 2095-72): 230 psi (16 kg/cm2) average
Flexural Strength (ASTM D 790-1-B): 2,260 psi (159 kg/cm2)
Durometer Hardness (ASTM D 2240): 82 (Shore D)
Pressure Retaining Capability: Recommended for pressures up to 400 psi (28 kg/cm2)
Temperature Resistance:
Continuous: -20° to 250°F (-29° to 121°C)
Intermittent: 250° to 500°F (121° to 260°C)
Set Time: 3 to 5 minutes at 50° to 80°F (10° to 27°C)
Cure Time: at 1/2" thick (1.27 cm) - 30 minutes
Ordering Information
Packaged: Ten rolls/case
Product Dimensions:
2 inch x 4 feet (5.08 cm x 1.2 m) - approximate case weight- 4 lbs. (1.8 kg)
2 inch x 12 feet (5.08 cm x 3.6 m) - approximate case weight- 6 lbs. (2.7 kg)
4 inch x 12 feet (10.16 cm x 3.6 m) - approximate case weight- 8 lbs. (3.61 kg)
Case Dimensions: 22" x 9.5" x 4.5" (56 cm x 24 cm x 13 cm)
Military/NSN Order Information
InduMar's Cage Code Number: ØDMC6
National Stock Numbers (NSN):
4730-01-301-3686 -- 2 inch x 4 feet STOP IT®
4730-01-301-3687 -- 2 inch x 12 feet STOP IT®
4730-01-301-3688 -- 4 inch x 12 feet STOP IT®
| 
