InduMar Products STOP IT® Pipe Repair System
Material Safety Data Sheet    MSDS Download

STOP IT Pipe Repair System      NFPA Placard Code

MATERIALS HEALTH, SAFETY AND ENVIRONMENTAL SHEET

Preparation Date: 09/01/06

RESIN COATED, KNITTED FIBERGLASS, WATER ACTIVATED REPAIR TAPE

INGREDIENTS

C.A.S. NO.

PERCENT

EXPOSURE LIMITS

Fiber Glass

65997-17-3

48-52

 

4,4’ - Diphenylmethane diisocyanate Other MDI isomers and oligomers

101-68-8

 

34-38

8-hour time weighted average (TWA) 0.005

Amine catalyst

6425-39-4

1-5

 

Methane Sulfonic Acid

75-75-2

<1

 

Other ingredients not precisely identified (including Polyethylene glycols) are proprietary and nonhazardous.

 

<12

 

SOURCE OF EXPOSURE LIMIT DATA--ACGIH (American Conference of Governmental Industrial Hygienists) THRESHOLD LIMIT VALUES   ABBREVIATIONS: N/A - NOT APPLICABLE
Product Name: STOP IT® Repair Tape
For Further Information Contact:
Telephone Number (713) 977-4100
Producer's Name: InduMar Products, Inc.
Address: 3355 West Alabama Suite 110
              Houston, Texas 77098
Office: (713) 977-4100

PHYSICAL STATE: Tacky resin on a fiberglass substrate

FLASH POINT: 440º F./227º C. (uncured product) Method: Closed Cup

Flash Back DOES NOT OCCUR.

Recommended extinguishing media:
CO², dry chemical or foam

COLOR: white/yellowish, also black

ODOR: Very slight

No unusual fire or explosion hazards.

Decomposition/Combustion products:
Carbon dioxide, carbon monoxide and traces of oxides of nitrogen
Hazardous Polymerization WILL NOT OCCUR. Product will not violently react with air or water.
Toxic Products will not form. Product is stable, not a hazardous waste.
Recommended storage conditions: Optimum 40-80º F./4-27º C.

RECOMMENDED WASTE DISPOSAL METHOD: Solid waste landfill or authorized incineration.

PERSONAL PROTECTION: Apply in well ventilated area. Protective clothing for normal application: Latex or plastic gloves. Eye protection for normal application: Safety glasses. Special fire fighting procedures: Wear self-contained breathing apparatus. STOP IT® polyurethane resin will adhere to clothing. STOP IT® polyurethane resin will not cause skin bond.

NOT FOR INTERNAL CONSUMPTION. KEEP AWAY FROM CHILDREN.

HEALTH DATA SHORT TERM EXPOSURE
Route
of
entry
Description of effect
Minimum
concentration
for effect
Inhalation


Skin




Eyes


Ingestion

No significant inhalation hazard upon removal of cured material.
Isocyanate vapors of uncured material below detectable limits.

Contact: Modified human draize patch test: Product is neither an
irritant nor an allergen. Absorption: Acute dermal LD50 > 2.0g/kg, no
reaction at this dose. Cured and uncured products are not expected to be sensitizing when used as directed.

Avoid contact; uncured material is not expected to be an irritant when
used as directed.

Oral LD50 > 5g/kg; no mortalities, or untoward behavior reactions
were noted.

LONG TERM EFFECTS: May be Slightly irritating to unprotected skin.
EMERGENCY AND FIRST AID PROCEDURES:
Inhalation: Provide fresh air, if breathing becomes difficult, call a physician.
Skin: Wash thoroughly with soap and water.
Eyes: Wash immediately with plenty of water and consult a physician.
Ingestion: Unlikely route. Drink plenty of water. Do not induce vomiting.
               Consult a nurse or physician. (Keep out of reach of children).

IMPORTANT NOTICE TO PURCHASER: All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not guaranteed. In accordance with "Terms and Conditions of Sale" and since conditions of use are outside our control, the purchaser should determine the suitability of the product for his/her intended use and assumes all risks and liability whatsoever in connection therewith.


ORDER IT! STOP IT Pipe Repair System Technical Information
STOP IT® FAQ
STOP IT® Usage Guide
STOP IT® Case Histories
Material Safety Data Sheet
Order It!
 

Miscellaneous News and Tips Contact Indumar

FIX STIX   FUSION TAPE   STOP IT Repair Clamp