InduMar Products
STOP IT® Pipe Repair System
STOP IT® Usage Guide

STOP IT Pipe Repair System

STOP IT® is available in three sizes: 2"×4’, 2"×12’, and 4"×12’

This information is presented in nominal sizes. Actual diameters vary
with the type of pipe or tube, and with thickness of fittings. When repairing
a fitting use the recommendation for the next, larger-size pipe as your guide.

Nominal
Pipe Size
Number of Rolls and Size
50 PSI
10 plys
150 PSI
15plys
400 PSI
20+plys
½" 1 (2×4) 1 (2×4) 1 (2×4)
¾" 1 (2×4) 1 (2×4) 1 (2×4)
1" 1 (2×4) 1 (2×4) 1 (2×4)
1¼" 1 (2×4) 2 (2×4) 3 (2×4)
1½" 2 (2×4) 2 (2×4) 1 (2×12)
2" 1 (2×12) 1 (2×12) 1 (2×12)
2½" 1 (2×12) 1 (2×12) 2 (4×12)
3" 1 (2×12) 2 (4×12) 2 (4×12)
3½" 1 (2×12) 2 (4×12) 2 (4×12)
4" 1 (2×12) 2 (4×12) 3 (4×12)
5" 2 (4×12) 2 (4×12) 3 (4×12)
6" 2 (4×12) 2 (4×12) 4 (4×12)
8" 2 (4×12) 3 (4×12) 5 (4×12)
10" 3 (4×12) 4 (4×12) 6 (4×12)
12" 4 (4×12) 5 (4×12) 8 (4×12)
14" 4 (4×12) 6 (4×12) 8 (4×12)
16" 5 (4×12) 7 (4×12) 9 (4×12)
18" 5 (4×12) 8 (4×12) 9 (4×12)
>18" Contact InduMar for detailed
application recommendations

All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not guaranteed. Since STOP IT® is a hand-applied product, results will vary with the expertise of the product's applicator. Recommendations regarding the number of rolls needed, and STOP IT®'s pressure retention capabilities assume the applicator has some experience with applying STOP IT® PIPE REPAIR SYSTEM. Since conditions of use are outside our control, the purchaser should determine the suitability of the product for his/her intended use and assumes all risks and liability whatsoever in connection therewith.


ORDER IT! STOP IT Pipe Repair System Technical Information
STOP IT® FAQ
STOP IT® Usage Guide
STOP IT® Case Histories
Material Safety Data Sheet
Order It!
 

Miscellaneous News and Tips Contact Indumar

FIX STIX   FUSION TAPE   STOP IT Repair Clamp