Indumar - Problem Solving Products for Industry
STOP IT® Case Histories
Power Generation Continued…

From Manchester, New Hampsire:
An electric utility used STOP IT® on a 4" diameter fiberglass line carrying ash and water. There was a crack at a 45° fitting from an expansion. The operating pressure was 10psi with a temperature of 200°F. They used two rolls of 2"×4" STOP IT® to stop the leak.


It Works!:
STOP IT® was used by a power generator in Texas on a 6" diameter fiberglass pipe carrying limestone slurry. The operating pressure was 10psi with an ambient temperature. Three rolls of 4"×12' STOP IT® were used to seal the leak.

Quote:
"It worked! It stopped the leak, just like the 20 or 30 other wraps on this particular line."


Back

Case histories are the sole property of Indumar, Products, Inc. and may not be reproduced or quoted in any media for any purpose whatsoever.
© InduMar Products, Inc. All rights reserved.