STOP IT® Case Histories
Refineries & Petrochemical
Major Southern Refinery in Mississippi:
STOP IT® was used on a 3/4" diameter galvanized pipe carrying steam condensate.
The operating pressure was 135psi with a temperature of 200°F. They used two
rolls of 2"×4' STOP IT® to seal the leak.
Quote:
"Thanks for providing a quick and economical fix for leaks that do not lend
themselves to clamps. Provides time until system shutdown allows replacement to
be made."
From a Refinery in the Houston / Texas City, Texas Industrial Complex:
STOP IT® was needed because they odorize natural gas and the product is very concentrated.
Any little leak is a cause of great concern. They used two rolls of 2"×12' STOP IT® on a 2"
diameter black iron pipe carrying mercaptan. The operating pressure was 60psi with an ambient temperature.
Quote:
"This is the best 'quick fix' for odorant leaks I have ever used, and in gas odorant leaks time
is everything."
From St. Albans, West Virginia:
STOP IT® was used on a 6" diameter steel pipe carrying TBA. The operating pressure was 12psi
with a temperature of -10°C. Eight rolls of 4"×12' STOP IT® were used to seal this leak.
Quote:
"So far, I've used your product several different times on various types of chemicals,
air lines, and natural gas lines, and all with excellent results. I am a strong believer in your
product and have recommended it to different people."
Read More!
|
Corporate Office: 3355 West Alabama, Suite 110 Houston, Texas 77098
(800) 523-STOP (523-7867) Tel: (713) 977-4100 Fax: (713) 977-4164
Web: www.stopit.com
Email: STOPIT@InduMar.com
Case histories are the sole property of Indumar, Products, Inc. and may not be reproduced or quoted in any media for any purpose
whatsoever.
© InduMar Products, Inc. All rights reserved.
STOP IT®, FIX STIXTM, STOP IT® PIPE REPAIR CLAMP, and FUSION TAPETM
are trademarks of InduMar Products, Inc.
|
|
|
