STOP IT® Case Histories - Pulp & Paper Mills

STOP IT® Case Histories
Pulp & Paper Mills Continued…

A Quick Fix:
An acoustical ceiling and wall manufacturing plant in Pennsylvania has used STOP IT® on several occasions to seal leaks on steel, stainless, galvanized, black iron, PVC, and fiberglass piping. Diameters of the piping have ranged from 4" to 10" with pressures up to 650psi and temperatures to 175°F.

Quote:
"Quick fix to a major problem."

Saving with STOP IT® in Pennsylvania:
A major Paper mill in Pennsylvania uses STOP IT® to rebuild centrifugal cleaning cones that have been worn away by grit particles in the vortex.

Quote:
"Using the STOP IT® kits we save time and money. The nylon cones cost over $100.00 a piece. By using the STOP IT® kit, we get twice the life from the cones."

Awesome!:
A paper mill in Louisiana used STOP IT® on a water line that ran across a paper machine where the leak was causing product loss.

Quote:
"I have used STOP IT® leak repair system in the past, and it is just one awesome product. The pipe was old and to replace it would have required 2 machines to be down for estimated 4 hours. The decision was made to use STOP IT® and the leak was repaired in less than 1 hour of downtime to one machine. The STOP IT® worked flawlessly until an outage availability 4 months later. The STOP IT® would have lasted for years."

Back