STOP IT® Case Histories
Metals & Minerals Continued…
Keeping Production Running in Michigan:
STOP IT® helps make temporary repairs in lines to keep production running until replacement parts
can be made up and downtime scheduled at this plant in Michigan. They use STOP IT® on steel,
stainless, galvanized, PVC, and fiberglass piping with diameters ranging from 1" to 10".
Their pipes carry MGO slurry's and brine and operate up to 50psi and 150°F.
Quote:
"It's simple and fast. We are a round-the-clock operation."
Rotten Pipes!:
STOP IT® was used in a Pennsylvania steel mill to seal a leak on a 6" diameter rotted out
black iron pipe. Four rolls of 4"×12' STOP IT® were used on this pipe that carried
acid gas and operated at 10psi and 180°F.
Precariousness in Indiana:
STOP IT® is routinely used in this metals plant to seal pin hole leaks or where sweat joints
would not hold in precarious areas to reach. STOP IT® is used on a variety of piping including copper,
galvanized, black iron, and PVC carrying wastewater and potable water. Diameters range from ½"
to 3" with operating pressures up to 80psi.
Back
Case histories are the sole property of Indumar, Products, Inc. and may not be reproduced or quoted in any media for any purpose
whatsoever.
© InduMar Products, Inc. All rights reserved.
|
