Indumar - Problem Solving Products for Industry
STOP IT® Case Histories
Metals & Minerals

From a Mine in Illinois:
STOP IT® was used on a rubber hose that had a hole approximately 3/8" wide × 3" long. The hose was 12" in diameter and carried magnetite and water. Four rolls of 4"×12' STOP IT® were used to seal this leak.

Quote:
"This pipe was approximately eight feet from the pump and is under a lot of pressure and also moves under pressure. Repairing this hole helped us to keep running coal on our weekly start up."


Steel Manufacturer in Indiana:
Two rolls of 2"×12' STOP IT® were used on a 4" rubber hose carrying hydrochloric acid. The pipe's operating pressure was 60psi with a temperature of 80°F. STOP IT® sealed the leak completely.

Quote:
"I needed STOP IT® because of holes in hose. Hose could not be replaced due to location in a wastewater manhole."


Corrosion in Pennsylvania:
A steel plant in Pennsylvania used two rolls of 4"×12' STOP IT® to seal a leak, caused by corrosion, on a 4" diameter black iron pipe carrying process water.

Quote:
"We use it [STOP IT®] all the time."


Read More!
Miscellaneous News and Tips Contact Indumar
Indumar Products, Inc.
Corporate Office: 3355 West Alabama, Suite 110   Houston, Texas  77098
(800) 523-STOP (523-7867)   Tel: (713) 977-4100   Fax: (713) 977-4164
Web: www.stopit.com   Email: STOPIT@InduMar.com

Case histories are the sole property of Indumar, Products, Inc. and may not be reproduced or quoted in any media for any purpose whatsoever.
© InduMar Products, Inc. All rights reserved.

STOP IT®, FIX STIXTM, STOP IT® PIPE REPAIR CLAMP, and FUSION TAPETM
are trademarks of InduMar Products, Inc.

 Stop It Repair System
Fix Stix
Fusion Tape
Repair Clamp
Order Online