STOP IT® Case Histories
Commercial Marine Continued…
Hazardous Cargo in New Jersey:
STOP IT® was used to repair a steel pipe carrying inert gas @ 3% Oxygen.
The line could not be welded because the line was in a tank carrying flamable products.
The pipe diameter was 6" with a pressure of 2.5psi, and a temperature 10°F above
sea water temperature.
Quote:
"This product is enormously handy here. Due to our service, age, and cargoes (Gasoline, Jet A, etc.), it allows
quick, safe, long term if necessary, temporary repairs."
A Report From Scotland:
STOP IT® is used on an international oil company owned vessel operating out of Scotland to repair steel, stainless steel, fiberglass,
polypropylene, and zeron 100 piping from 1" to 18" diameters. The lines carry water (fresh & sea) or diesel.
The operating pressures range from 0 – 12bar and the temperatures range from 0° to
36°C.
Quote:
"Idiot proof to use, peace of mind repair, even a one handed, blind
monkey could use it effectively."
Back
Case histories are the sole property of Indumar, Products, Inc. and may not be reproduced or quoted in any media for any purpose
whatsoever.
© InduMar Products, Inc. All rights reserved.
|
