STOP IT® Case Histories
Commercial Marine
 Emergency Resposnse:
STOP IT® was used to repair the vent stacks on the barge M/V Mr. Barry when it struck the Louisa Bridge.
A Cargo Tanker out of Lousiana:
STOP IT® was used to repair an electrical conduit inside a cargo tank. The pipe was
a 1" stainless steel line with a temperature range of 60° – 100°F. One roll
of STOP IT® was used.
Quote:
"We used STOP IT® on a 1" stainless steel pipe used as a conduit for wiring
our sensors in our cargo tanks– the sensors measure the level of cargo in the tank.
The 1" pipe developed a crack allowing gasoline to damage the sensors. We used
STOP IT® to repair the crack until it could be welded. STOP IT® is a great product,
keep up the good work!"
From Tampa, Florida:
STOP IT® is used on a variety of applications including steel, copper, galvanized, and
black iron piping ranging in size from ½" to 14" in diameter. Steam, water, and petroleum
travel through piping with pressures ranging from 10psi to 135psi .
Quote:
"STOP IT® works great! We use it on cargo piping, saltwater piping, and steam piping. We have used
it since 1992."
Ballast Line Leaks in Florida:
A 14" diameter galvanized water–ballast line operating at 150psi was repaired using two rolls of
4"×12' STOP IT®.
Quote:
"Don't leave home without it."
Read More!
|
Corporate Office: 3355 West Alabama, Suite 110 Houston, Texas 77098
(800) 523-STOP (523-7867) Tel: (713) 977-4100 Fax: (713) 977-4164
Web: www.stopit.com
Email: STOPIT@InduMar.com
Case histories are the sole property of Indumar, Products, Inc. and may not be reproduced or quoted in any media for any purpose
whatsoever.
© InduMar Products, Inc. All rights reserved.
STOP IT®, FIX STIXTM, STOP IT® PIPE REPAIR CLAMP, and FUSION TAPETM
are trademarks of InduMar Products, Inc.
|
|
|
