Emergency Leak Control Kits
UNIVERSAL SERIES -
Kits AE and D
Universal kits are designed to plug hazardous material leaks in any type of low-pressure vessel.
The kits contain everything needed to respond to leaks in tanks and drums.
The wide variety of sealing devices and materials address surface holes of all shapes, as well as cracks and gashes.
All bolts, back-up plates, and hardware manufactured from 304 stainless steel. Accompanying tools
are available in standard or non-sparking versions.
|
|
EXTERNAL PIPE LEAK CONTROL KITS -
Kits C-2 and C-3
Pipe Leak Control Kits are designed to quickly respond to leaks in straight runs of piping.
Simply snap the clamp around the pipe, drop bolt head through open-slotted lug and tighten
nuts. Versatile clamps respond to water, wastewater, fuel, chemical, air and gas leaks.
Repair clamps are made of corrosion resistant 304 stainless steel, lugs are made of rugged
ductile iron and shop coated for added protection. Bolts are plated for longer life. Grade
304 rubber compound gasket offers superior resistence to oils, aromatic and aliphatic
hydrocarbons, condensates, gasoline and natural gas.
All External Pipe Leak Control Kits include extra solid neoprene and closed-cell foam gasketing
material for odd sized, out-of-round, and corroded pipe applications. Accompanying tools are
available in standard or non-sparking versions. Kits are packaged in a heavy-duty carrying case.
PIPE PLUGGER KIT -
Kit C-1
The Pipe Plugger Kit is designed to quickly plug open-ended pipes.
Kit allows you to instantly
plug knocked-off pipes carrying water, fuel, chemicals and gas.
Great for knocked-off gas
meters and tank truck discharge valves. 1" to 5" sizes have pressure relief vents to help
get the plugs seated under pressure. Pressure relief vents on 1-1/2" through 5" plugs can
connect to enclosed valve and discharge hose. This enables fluid or gas to be rerouted to
another line, discharged to a recovery vessel or flared. The Pipe Plugger Kit can also be used
for drain line cleaning and nitrogen purging operations.
THE ROLL-OVER KIT -
Kit F
The Roll-over Kit is designed to patch a large hole, crack, or gash in a large vessel or tank.
The kit has a patch that conforms to the curvature of the vessel. The patch uses a variety
of T-bolts to support itself directly to the hole. The leak is then sealed by tightening
the compression bolts around the frame, conforming the patch to the vessel.
|
